Mercury6e
M6e

The Mercury6e (M6e) embedded UHF RFID reader module offers world leading performance, form factor, and time-to-market advantages to OEM, Value Added Reseller, and Solution Provider customers. It is designed to the performance standards of full size readers, but is small and efficient enough to be used in mobile applications. The M6e supports 4 ports and will operate to a level of +31.5 dBm. Serial and USB interfaces are provided to support both board-to-board and board-to-host connectivity.

Features of the Mercury6e RFID reader module include:

  • Multiprotocol support including EPCglobal Gen 2 (ISO 18000-6C) with DRM, ISO 18000-6B (optional) and IP-X (optional)
  • Four 50 Ohm MMCX connectors supporting four monostatic antennas
  • Separate read and write levels, command-adjustable from 5 dBm to 31.5 dBm (1.4W) with +/0.5 dBm accuracy above +15 dBm
  • Support for full 860 to 960 MHz UHF RFID carrier frequency range to accommodate worldwide regulations
  • Certifiable for operation in countries adopting FCC, ETSI, MIC (KR) and SRRC-MII (P.R. China) regulatory specifications
  • TTL level asynchronous data interface supporting speeds up to 921.6 kbps
  • USB 2.0 full speed device port (up to 12 Mbps)
  • Operating temperature range of -40 C to +60 C
  • Maximum tag read rate of over 400 tags per second
  • Maximum tag read distance of over 30 feet (9 m) with 6 dBi antenna
  • 4 GPIO lines controlled through data interface

Get Datasheet

This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

RFID Demand Increasing

"Month to month, we're seeing demand for RFID label applications that extend far beyond traditional retail and supply chain use. In addition to CPG suppliers, manufacturers and retailers, our RFID customers include businesses in the food industry, pharmaceuticals, healthcare and other markets, using RFID for inventory control, asset tracking, document tracking, and even patient tracking. When they see a demonstration of a 10-second RFID scan of a rack of products versus a 10-minute manual bar code scan of the same rack, they're eager to adopt RFID and customize an application for their specific use."

-- Stephen Hull, Sato America